ALb003

Technical details:
Is intended for lowering and hoisting anchors weighing up to 8 kg. The set includes an Al003 holder and an FMb mounting system. The design comprises a cast body with 27.7° side splines, a stopper with a cord for releasing a rope or belt, a spring, a roller, a male adapter shaped as a 12 pointed star, which is connected to the holder body by tilt joint equipped with Dp230 7.5° spline washers. The tilt position is fixed using an M6*50 DIN 931 bolt and a hex knob with an inserted M6 DIN 934 nut. Fits for a halyard Ø up to 10 mm and a belt up to 35 mm wide and up to 2.5 mm thick. The assembly also includes two M6*55 DIN 912 screws, and two M6 DIN 985 self-locking nuts. The FMb system consists of an Fs219 mount and a mounting pad, fastened together with four 6.3*32 DIN 9200 self-tapping screws. The package includes a hex wrench. The main parts are made of fiberglass-reinforced polyamide. Fasteners and the spring are made of A2 (AISI 304) stainless steel (except for an M6 DIN 934 brass nut).



Product description:
The kit of this model is designed for installation of the anchor system on vessels with a hard deck or side. The holder included to it, is suitable for anchors weighing up to 8 kg. Fits for a halyard up to 10 mm and belts up to 35 mm wide and up to 2.5 mm thick.
The tilt position of the holder can be 180° adjustable in 7.5° increments.
The spring-loaded locking system automatically fixes the anchor: just pull the rope while hoisting the anchor.
For easy lowering, a releasing system is provided: just pull the cord on the holder body.
A convenient roller makes it easier to slide a belt or halyard.
The FMb system, which includes the Fs219 mount and a round pad, is reliable for installation on hard surfaces (aluminum, fiberglass, polyethylene, wood) and fits for any BORIKA FASTen® accessories: spinning rod holders, fish finders plates, action camera monopods, tables, rigging, awnings, and much more.
The advantage of this system is four mounting points. This design is reliable at medium and high loads.
Fixation is fast and simple: switch the locking mechanism into the UNLOCK position, insert an adapter all the way into the mount, and move the retainer into the LOCK position. You can rotate the holder in 30° increments.
Materials: fiberglass-reinforced polyamide, PVC, A2 (AISI 304) stainless steel.
In the package: an Al003 anchor holder, an FMb mounting system, fasteners (4 6,3*32 DIN 9200 self-tapping screws), step-by-step installation guide, a hex wrench.
Tips on using & installation:
By attaching a longer rope to the releasing cord, the user gets the opportunity to release the anchor halyard while being at a distance from the holder.
The spline joint also allows for creating various assemblies: for example, connecting the holder with an anchor roller, an As222 reinforced male adapter, and an extender.
The kit can be attached on 5+ mm thickness polyethylene surfaces, as far as 5+ mm wooden, 3+ mm aluminum and 4.5+ mm fiberglass surfaces. Installation is easy to do using the included step-by-step guide.
For ease of installation, the package includes a hex wrench, suitable for the fasteners provided in it.
Pay attention that the reliability of the mounting system depends not only on the mount and pad, but also on the strength of the mounting surface. For example, this should be taken into account when installing the system on polyethylene boats.
To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.