Technical Details:
Designed for mounting two action cameras or one action camera with a lighting (a flashlight). The design comprises two 2-to-3 GoPro mounting connectors and a bracket with a 1/4'' screw thread that is attached to one of them, which are fixed in another 2-to-3 connector on a male adapter shaped as a 12 pointed star. The holder is 360° rotated without the nee...
Technical Details:
Designed for mounting an action camera and lighting (a flashlight) in a 2-to-3 GoPro mounting connector of other holders. The design includes two 2-to-3 connectors, a bracket with a 1/4'' screw thread, and an Hf030 holder for lighting. You can mount the whole structure into any 2-to-3 GoPro connector. Each of two mounting connectors is equipped with an M5*...
Technical details:
Designed for mounting various carp gear. The design consists of an adapter with bottom external splines shaped as a 12 pointed star, and a disk, equipped with a standard thread for carp gear. The adapter has an O-ring. The diameter of the top part of the adapter is 34 mm. The main parts are made of fiberglass-reinforced polyamide.
Product description:
This...
Technical Details:
Designed to implement various design solutions when equipping a vessel. Made as a one-piece molded product of fiberglass-reinforced polyamide. The male adapter has a Ø 10 mm axial hole and is shaped as a 12 pointed star. Equipped with an O-ring. Can be 360° rotated around the axis in 30° increments.
Product description: —
Materials: fiberglass-reinforced...
Technical details:
Designed for creating assemblies with accessories that are provided with a tilt joint. The double fixation system allows for reducing the oscillations of the structure and makes it more rigid. The assembly consists of an adapter shaped as a 12 pointed star with side 27.7° splines at the top, a compression plastic nut, and an O-ring. Plastic parts are made...
Technical details:
It is intended for lowering and hoisting anchors weighing up to 20 kg. The design consists of a cast body with 27.7° side splines, a stopper with a cord for releasing a rope or belt, a spring, a roller, as well as an As222-1 reinforced male adapter with double-sided splines shaped as a 12 pointed star, connected to the holder body and an end washer by tilt...
Technical details:
Is intended for lowering and hoisting anchors weighing up to 8 kg. The set includes an Al003 holder and an FMb mounting system. The design comprises a cast body with 27.7° side splines, a stopper with a cord for releasing a rope or belt, a spring, a roller, a male adapter shaped as a 12 pointed star, which is connected to the holder body by tilt joint equi...
Technical details:
It is intended for lowering and hoisting anchors weighing up to 8 kg. The kit includes an Al002 holder and an FMp224 mounting system. The design of the holder comprises a cast body with a male adapter shaped as a 12 pointed star, a stopper with a cord for releasing a rope or belt, a spring and a roller. Fits for a halyard Ø up to 10 mm and a belt up to 35 ...
Technical details:It is intended for connection together of two BORIKA FASTen® accessory mounts. The design consists of two connectors with adapters shaped as a 12 pointed stars and side 27.7° splines fastened in a tilt joint with an M6*55 DIN 933 bolt and a hex knob nut. The joint comprises 2 washers with 7.5° splines, and a spring. Each adapter is equipped with an O-ring. ...
Technical Details:
It is intended for installation on a vessel of awning tubular structures with an inner tube diameter of 32 mm or an outer diameter of 22 mm. The design consists of a tube joint, fastened to a male adapter shaped as a 12 pointed star by a U-joint. The assembly includes fasteners: two M6 DIN 125 washers, two self-locking M6 DIN 985 nuts, an M6 DIN 934 nut, a...
Technical Details:
It is intended for installation on a vessel of awning tubular structures with an outer tube diameter of 22 mm. The design consists of a body with a male adapter shaped as a 12 pointed star and a plastic tube holder, fastened together by a U-joint with an M5*20 DIN 912 screw and an M5 DIN 985 self-locking nut. The adapter is equipped with an O-ring. The mai...
Technical Details:
Designed for installation of awning tubular structures on a vessel. The design consists of a male adapter shaped as a 12 pointed star, U-joint axle, plastic washer and M6 DIN 125 washer, an M6 DIN 934 self-locking nut, an M6*25 DIN 912 screw. The adapter is equipped with an O-ring. The main parts are made of fiberglass-reinforced polyamide. Fasteners — of ...
Technical Details:
The system is designed to mount accessories provided with a male adapter shaped as a 12 pointed star on tubes of Ø 20 — 32 mm and surfaces from 10 to 32 mm thick without drilling. Consists of an Fs219 mount and a bench mounting pad. The design of the bench pad includes a bracket, the inner upper part of which is covered with PVC, a clamp with an M3.2 DIN 6...
Technical Details:
Designed for fixing accessories with a male adapter shaped as a 12 pointed star to rails and tracks of Ø from 19 to 48 mm, and using an extender — of Ø from 42 to 70 mm. Consists of two Fs219 mounts and a clamp mounting pad. The clamp is designed in the form of 2 jaws, fastened together with an M6*110 DIN 931 bolt which serves as an axis and a Kn222 knob w...
Technical Details:
This mount is designed for fixing accessories at the distance of 220 mm from an installation place. The assembly includes a mount, an extender (L — 205 mm) and an adapter with 27.7° side splines. On the one side the extender is fastened together with the mount for accessories and on the other — with the adapter. Both joints have 27.7° splines and are equip...
Technical Details:
Designed for fixing accessories at a distance of 100 mm from the installation place on the vessel. Includes a Ø 50 mm mount with side 27.7° splines, an Ex100 extender and an adapter. The extender is connected with the splines of the mount from one end, and with the splines of the adapter from the other end. Both joints fastened with M6*40 DIN 933 bolts and...
Technical Details:
This mount is designed for fixing accessories provided with male adapters shaped as a 12 pointed star, and adding them a tilt option. The design comprises an accessory mount and an adapter with 27.7 side splines fastened together in tilt joint with M6*50 DIN 931 bolt and an M6 DIN 934 nut. For fixing a tilt position is intended the hex knob nut. The mount ...
Technical Details:
Designed for mounting an action camera at a distance of 400 mm from the place of installation on the vessel. The assembly includes an Ng002 swivel-tilt camera holder and an Ex400 extender. The design of the holder consists of a bracket with a 1/4'' screw thread, a 2-to-3 GoPro mounting connector with an M5*30 DIN 931 bolt, an M5 DIN 934 nut with a square k...
Technical details:
Designed to complement accessories with more flexible adjusting options. Consists of an Ab038 ball adapter and an Sb038 socket. The Ab038 has a 1.5" (38 mm) ball and an adapter shaped as a 12 pointed star, the base of the ball is covered with a layer of polyurethane. The socket consists of 2 parts connected to each other with an M8*60 DIN 933 bolt, an M8 D...
