Technical Details:
Designed for installation of fish finders with a screen diagonal from 9″ to 12″. Consists of a plate (220 x 52 mm), a mount with female adapter, screwed on its back side using an M6*16 DIN 965 screw and an M6 nut DIN 985, a male adapter with a 27.7° splines tilt joint completed with 7.5° washers (Dp230 model), reinforced with an M6*25 DIN 931 bolt. The til...
Technical Details:
The kit includes an Ht213 spinning rod holder and an Fs218 accessory mount equipped with a bottom T-bolt. It has been designed for mounting a spinning rod on the T-Track of fishing kayaks. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, a tilt 27.7° splines joint, completed with 7.5° s...
Technical Details:
Designed for mounting an action camera on the vessel. The design comprises a bracket with a 1/4'' screw thread, a 2-to-3 GoPro mounting connector, the tilt 15° spline joint and a male adapter shaped as a 12 pointed star. The mounted equipment can be rotated in relation to the holder, as well as the whole structure can be 360° rotated in relation to the ada...
Technical Details:
Designed for mounting action cameras at a distance of up to 710 mm from the installation place. The design comprises a 1/4'' screw thread and a 2-to-3 GoPro connector, attached to a two-stage telescopic tube (length adjustment from 420 to 710 mm) with a spline joint. The tube is connected to the male adapter shaped as a 12 pointed star using a 27.7° spline...
Technical Details:
The mounting pad is designed for installation of T-Track adapters of any models on the hard deck or side of the vessel (fiberglass, aluminum, polyethylene, or wood surfaces). The length of the pad is 150 mm. It is a one-piece product, the design of which provides a T-Track, repeating the shape of tracks at most fishing kayaks and aluminium motorboats. It c...
Technical Details:
The mounting pad is designed for installation of T-Track adapters of any models on the hard deck or side of the vessel (fiberglass, aluminum, polyethylene, or wood surfaces). The length of the pad is 255 mm. It is a one-piece product, the design of which provides a T-Track, repeating the shape of tracks at most kayaks and motorboats. It can be fastened to ...
Technical Details:
It is intended for use as an oarlock in a pair with oars, the diameter of which is Ø 35 mm, as well as for creating additional structures with tubes of the same diameter. The design includes a clamp, consisting of a bracket made as a one-piece cast of fiberglass-reinforced polyamide, fastened together with an M6*40 DIN 933 bolt of A2 (AISI 304) stainless s...
