BORIKA Onboard Transducer Arm Mount for Garmin Panoptix LiveScope LSp400

Technical Details:
It has been designed for installation of the Garmin Panoptix LiveScope transducer and transducers with side mounting. The design consists of an eccentric tube Ø 20,4 mm (L — 400 mm), connected to a similar tube (L — 170 mm) by a two-element clamp and to a tube (L — 120 mm) with 7.5° spline tilt joint. The design is fixed into the mount by a male adapter shaped as a 12 pointed star. The transducer mount is attached to the tube with 7.5° splines and is equipped with a special adapter to install this transducer. The design has three square knob nuts for fixation of the chosen tilt joint. The main parts are made of fiberglass-reinforced polyamide. The tube is made of anodized aluminium with powder coating. Fasteners ( M6 and M4 DIN 985 nuts, three M6*35 DIN 933 bolts and M4*20, M6*20, M6*30 DIN 912 screws) and a spring — of А2 grade (AISI 304) stainless steel (except for three M6 DIN 985 brass nuts).


Product description:
The LSp400 transducer arm mount is designed for installation of the Garmin Panoptix LiveScope™ transducer and transducers with side fastening along the side of a fishing kayak or belly boat (float tube).
The maximum immersion depth of the arm is 40 cm. The design of the holder allows for adjusting the immersion depth of the sensor changing the position of the tube collars.
The spline tilt joint allows the transducer to be adjusted to a comfortable configuration during use and fix it compactly in the raised position.
The design provides a handle that allows the user to adjust the angle of view with 360° rotation, which is important for the Garmin Panoptix LiveScope™ transducer with bottom and side scan functions and real-time fish indication system.
The adapter of the arm mount is compatible with all BORIKA FASTen® mounting systems. Using the conversion adapters you can also fix it in mounting systems from other manufacturers ( SCOTTY®, RAM®, RAILBLAZA®, YakAttack®, etc.).
Materials: fiberglass-reinforced polyamide, anodized aluminium with powder coating, A2 (AISI 304) stainless steel, brass.
In the package: an LSp400 transducer arm mount.
Tips on using & installation:
You can increase the length of the holder to approximately 50 cm by changing the position of the middle tube (L — 17 cm), when connecting it to the main tube (L — 40 cm) and then connecting the clamp with the adapter that secures the design to the boat.
The structure can be supplemented with extenders which have 15° side splines.
It can also be supplemented with a universal set of transducer fastenings, which makes it possible to install with its help equipment of many modifications. This set includes a fastening with a 50 mm bolt, radius washers and a knob nut and the expanding (covering) fastening system with swivel brackets, radius washers and “fins”.
To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.