FTr300

Technical Details:
It has been designed for installation of the transducer at a distance of 300 mm from the mounting point on a kayak or belly boat (float tube). The design consists of the transducer mount with an M6*50 DIN 931 bolt and square knob nut that is joined to the tube Ø 22 mm, L — 250 mm, a male adapter shaped as a 12 pointed star and the tilt joint. The joint with the main splines is 27.7° and it’s equipped with 7.5° adapter washers, a spring and an M5*60 DIN 912 screw. The tilt position and rigidity of the joint is adjusted with a knob with the inserted M5 DIN 934 nut. The main parts are made of fiberglass-reinforced polyamide. The tube is made of anodized aluminium, fasteners — of A2 (AISI 304) stainless steel.

Product description:
It is one of the most easy and compact models of the transducer arm mount, handy for mounting transducers on board of fishing kayaks and belly boats (float tubes).
The fastening of the transducer is 90° rotated in relation to the mounting pad in order to enable the installation of the transducer along the side.
It allows transducers (sonars) from Lowrance, Raymarine, Garmin and Humminbird and others to be installed at a distance of up to 30 cm from the mounting point.
To secure the transducer use a 50 mm bolt, adjusted washers with small splines and a square knob nut.
The design has a tilt spline joint that adjusts the position of the equipment in 7.5° increments. The knob nut allows the structure to be fixed in the raised position when the transducer is not in use.
Can be easily fixed in any BORIKA FASTen® mounting system pre-installed on the transom (the FMb, FFr444 systems or Mb218 pad with the Fs218 mount are suitable).
The tube that is the basis of the structure is made of anodized aluminium, which protects the metal against rusting and adverse environmental influences.
Materials: fiberglass-reinforced polyamide, anodized aluminium, A2 (AISI 304) stainless steel.
In the package: an FTr300 transducer arm mount.
Tips on using & installation:
To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.