Technical Details:
The system is designed for mounting accessories provided with male adapters shaped as a 12 pointed star on hard, flat, smooth surfaces of vessel (aluminum, fiberglass and laminated wood). Consists of an Fs219 mount and a mounting pad (110 x 110 mm), the base of which is covered with 3M VHB tape. The mount comprises a female adapter. Attached to the pad wit...
Technical details:
Designed to mount accessories with a male adapter shaped as a 12 pointed star on the PVC inflatable boat or belly boat boltrope. The assembly includes a mount with 27.7° side splines, an Mx system, a pair of Dp230 washers with 7.5° splines and an end plug fastened together with an M6*60 DIN 933 bolt and an M6 DIN 985 nut. The tilt position is fixed with a ...
Technical Details:
Designed for fixing spinning rods with different types of reels and handle diameter of up to 38 mm during fishing and transportation. The design comprises the holder body, the retainer, an end limiter, a male adapter shaped as a 12 pointed star and the tilt 27.7° spline joint complete with 7.5° spline adapter washers and a spring. The tilt position is fixe...
Technical Details:
It has been designed for installation of the transducer at a distance of 300 mm from the mounting point on a kayak or belly boat (float tube). The design consists of the transducer mount with an M6*50 DIN 931 bolt and square knob nut that is joined to the tube Ø 22 mm, L — 250 mm, a male adapter shaped as a 12 pointed star and the tilt joint. The joint wit...
Technical Details:
Designed for fixing accessories at a distance of 100 mm from the installation place on the vessel. Includes a Ø 50 mm mount with side 27.7° splines, an Ex100 extender and an adapter. The extender is connected with the splines of the mount from one end, and with the splines of the adapter from the other end. Both joints fastened with M6*40 DIN 933 bolts and...
Technical Details:
Designed for fixing objects with a diameter of from 20 mm to 50 mm. The design consists of a bracket with special external protrusions for fixing the elastic clamp. The bracket is connected to the swivel-tilt adapter using an M6*40 DIN 912 screw and an M6 DIN 985 nut, a tilt joint includes a spring, two Dp230 washers with 7.5° splines, and a male adapter s...
Technical details:
It is intended for lowering and hoisting anchors weighing up to 8 kg. The design consists of a cast body with 27.7° side splines, a stopper with a cord for releasing a rope or belt, a spring, a roller, a male adapter shaped as a 12 pointed star, which is connected to the holder body by tilt joint equipped with Dp230 7.5° spline washers. The tilt position i...
Technical Details:
It has been designed for installation of the transducer at a distance of 300 mm from the mounting point on the transom. The design consists of the transducer mount with an M6*50 DIN 931 bolt and a square knob nut, that is connected to the tube Ø 22 mm, L — 250 mm, a male adapter shaped as a 12 pointed star and tilt joint. The 27.7° main spline joint is eq...
Technical details:
Designed to complement accessories with more flexible adjusting options. Consists of an Ab038 ball adapter and an Sb038 socket. The Ab038 has a 1.5" (38 mm) ball and an adapter shaped as a 12 pointed star, the base of the ball is covered with a layer of polyurethane. The socket consists of 2 parts connected to each other with an M8*60 DIN 933 bolt, an M8 D...
Technical Details:
The system is designed for mounting accessories provided with male adapters shaped as a 12 pointed star on belly boats (float tubes). The system includes an Fs219 mount and a strap holding system. Strap length is 1.5 m, width — 35 mm. The mount, a pair of strap holders and a decorative cover that serves as an end plug are all connected with four M6*20 DIN ...
Technical Details:
Designed for mounting an action camera and lighting (a flashlight) in a 2-to-3 GoPro mounting connector of other holders. The design includes two 2-to-3 connectors, a bracket with a 1/4'' screw thread, and an Hf030 holder for lighting. You can mount the whole structure into any 2-to-3 GoPro connector. Each of two mounting connectors is equipped with an M5*...
Technical Details:
The plate is designed for fixing fish finders and other equipment that have mounting points with distance between them up to 95 mm. The plate area is 106 x 98 mm, the wall is 3 mm thick. On the back side of the plate, there are thickened mounting points that match the standard mounting holes of the popular fish finders. The adapter with the side splines is...
Technical Details:
Designed for mounting fish finders and other equipment, the distance between the standard mounting holes of which does not exceed 150 mm. The plate area is 164 x 68 mm, its wall is 3 mm thick. The plate is connected together with a swivel-tilt adapter by M6*30 DIN 912 screw and M6 DIN 985 nut. The design allows the plate to be 360° rotated around the axis ...
Technical details:
Designed to hold various drinks and to keep things on board organized. The design consists of a holder body and a retainer that has three positions: open, close and half-close (for fixing the mug handle), as well as HLt T-Track adapter. Can be mounted on the T-Track of aluminium boats, directed into the inner space of the vessel or on TRk150 and TRk255 mou...
Technical details:
Designed to create structures with accessories equipped with side splines and requiring increased loads. The design consists of an adapter shaped as a 12 pointed star, which has on top 27.7° double-sided splines. The adapter is made as a one-piece molded product and reinforced with a stainless steel plate, it comprises a set of Dp230 adapter washers, an en...
Technical Details:
Designed for mounting accessories with 27.7° side splines on the boltrope of PVC inflatable vessels. The tilt joint of the pad has double-sided 27.7° splines and includes two Dp230 adapter washers with 7.5° splines, a spring, an end plug, a hex knob and fasteners: M6*60 DIN 933 bolt and M6 DIN 985 nut. The main parts are made of fiberglass-reinforced polya...
Technical details:
Designed to mount accessories at a distance of 220 mm from the installation place. The assembly includes a compact accessory mount inserted into the extender tube, the tube (L — 180 mm, Ø 32 mm), and a one-piece male to male adapter, reinforced with an M6*25 DIN 931 bolt. The design comprises both male (for installation on the vessel) and female (for fixin...
Technical details:
Designed to extend the distance between the accessory and the mount in which it is fixed by 305 mm. The design consists of a Ø 25 mm, L — 255 mm tube, 2 connectors with side 27.7° splines located along its edges, a spring, an M6*50 DIN 931 bolt and a hex knob with an inserted M6 DIN 934 nut. The plastic details are made of fiberglass-reinforced polyamide. ...
Technical Details:
The system is designed for mounting accessories provided with male adapters shaped as a 12 pointed star in rectangular mounting niches of kayaks and motorboats. Consists of a Fs219 mount and a mounting pad (110 x 53 mm). The mount comprises a female adapter. Is attached to the pad with 4 screws M6*20 DIN 912 and nuts M6 DIN 934. To install accessories, swi...
Technical Details:
Is designed for mounting flat objects and equipment with a flat base. It can be used for connection of two Fs219 mounts and creation of the design with a remote mount. The plate diameter is 63 mm. It is connected with the adapter by an M6*60 DIN 912 screw and an M6 DIN 985 self-locking nut. The design allows the plate to be 360° rotated around the axis in ...
